All releases
2026.11.03URBI Kore

Bank reconciliation end to end, a roomier Record Payment, and fewer blank screens

You can now tie a deposit to the pre-authorized debit files behind it and split one bank line across several entries. Reconciliation, statement import and month close were reviewed end to end, so every refusal says why and a deposit is never counted twice. Record Payment is larger and keeps your picked invoices, withdrawn bills can be deleted, HERO AI reads filed documents, and Kore recovers instead of going blank during slowdowns.

Everything in this release

New

  • Reconciliation

    Tie a deposit to the debit files behind it

    A deposit that came in from pre-authorized debits or a payout file can now be tied to the debit file, or several files, that produced it, so the money is never counted twice. The bank line menu has Match to debit file and Undo debit-file match, and a tied line reads "Tied to debit file" with the file name. The tie drawer opens from any page of results, can tie older files, shows each file's sent date, uses singular wording where it applies ("1 payment"), closes after a tie, and confirms with "Deposit tied to 2 debit files". Education and commercial properties see their own words ("parent's", "employee's").

  • Reconciliation

    Untied debit files count, filter and overnight auto-tie

    An "Untied debit files" count and filter show which deposits still wait for a debit file. URBI also ties the obvious cases overnight. When it is not sure it leaves the line for you instead of guessing, and it never ties inside a closed month. A deposit tied back to its own refunded payment, and a deposit tied to a refund or vendor credit, now count correctly in the open worksheet.

  • Reconciliation

    Split one bank line across several entries

    Split a single bank line into up to 20 parts and match each part on its own. Matched parts are locked, Add part and Edit still work after a part is matched, and the split drawer shows the line's amount, date and direction. Undo split works again for everyone who is allowed to use it (it used to say "Unauthorized"), and the undo reason is optional. Overnight matching suggests matches for the parts, not the whole line. On a phone the split rows become cards. Splitting, editing or undoing a split is refused while money is already recorded against the line, so nothing is undone behind your back.

  • Reconciliation

    Recalculate on a reconciliation worksheet

    A new Recalculate control brings a worksheet's cleared balance up to date. Reconcile is refused while the difference is not zero or the cleared balance is out of date, and the message tells you to press Recalculate.

  • Reconciliation

    Last synced badge, Worksheets in month panel, Locked badge

    Each account shows a "Last synced" time (a warning appears after 24 hours). A "Worksheets in" panel lists the month's worksheets, locked worksheets carry a separate Locked badge, and Periods opens straight from a finished worksheet.

Improved

  • Reconciliation

    Closing a month needs every day covered

    A month can be closed once its locked statements cover every day. A month with gaps is refused with the reason. The next month's opening balance refreshes on its own, a new worksheet no longer starts at $0.00, and reopening an earlier month no longer zeroes the next month's opening balance.

  • Reconciliation

    Clear worksheet refusals and balance wording

    Worksheet refusals show a plain sentence instead of "Internal server error". The difference line reads "over" or "short of the statement ending balance" and a balanced worksheet says Balanced. Mark reconciled becomes available on a balanced in-progress account. Starting an existing worksheet now applies or refuses the new ending balance instead of ignoring it, and locking inside a closed month needs the locked-period override on both the lock and reopen paths.

  • Reconciliation

    Reopen asks why, and says who can allow it

    Reopen asks for a typed reason, and the dialog now works with a mouse as well as the keyboard. When you are not allowed to reopen, the message names who can grant it. After Discard the start card comes back and the matching progress no longer sticks at "0 of N".

  • Reconciliation

    Worksheets and the Periods list stay current and load without flicker

    The Periods list updates right after you start, lock, reopen or discard a worksheet or commit a statement. A worksheet no longer flashes empty content while it loads. If the server is slow the page checks again with a "Checking status" warning and then shows Closed or Open, and ticking a line shows the tick at once.

  • Statement import

    Lines already in the feed are blocked, and the counts are honest

    Lines already in the bank feed are blocked at commit with no override. The Commit button counts only the lines that will really be added, a batch's own lines are no longer flagged "Already in the feed", and statements with no dates or with lines outside the period are counted correctly. Large properties get duplicate checks across every line, not just the first page, and a retry after a lost reply no longer leaves a wrong closing figure.

  • Statement import

    Review shows the real lines, and a missing balance is not guessed

    After upload the review shows the real lines and the period read from the statement. While it loads, Commit lines stays disabled instead of saying "Commit 0 lines". A missing balance no longer produces a made-up verdict, and the tie-out card includes the opening balance so a balanced statement reads "Ties out". Resume review opens straight on the review step.

  • Statement import

    Closed months and existing worksheets are explained

    A statement whose month is closed or not set up adds nothing and says so, naming the dates that have no accounting month. When a worksheet already exists at a different closing balance, the result says the lines were committed but not attached, with Open that worksheet and Close buttons. Attach now really fills the existing worksheet (it used to stay at 0 lines and $0.00).

  • Statement import

    Overlapping statements: keep as separate lines

    When a statement overlaps lines already in the feed you choose between two options. Keep as separate lines always works and ends with a green "N lines added to the bank feed" panel without creating a period. The red "This batch cannot be committed" banner no longer flashes while a commit runs.

  • Statement import

    Clearer periods, dates and phone layout

    Periods show their year when they cross a year end ("Dec 15, 2025 to Jan 14, 2026"), the heading reads "period not stated yet" when the statement has no dates, and the duplicate-file alert shows your local time instead of a raw timestamp. On a phone the drop zone no longer shows an unlabelled "Choose File" button.

  • Reconciliation

    Bank lines list is clearer and more honest

    The account shows as bank, account name and last four digits instead of a raw feed id, and the row's second button is named "More actions for" the description for screen readers. "Auto-matched today" counts automatic matches only, and the paid-expenses count explains itself on hover. The "Matching failed" marker stays visible on lists past 1000 lines, and the list never shows raw database text when something goes wrong.

  • Reconciliation

    Matches in progress, hand matches and undo

    A match that is still running shows a Matching chip and hides Hero and Match until it finishes. If it fails the row goes back to Unmatched with a message. A line you matched by hand shows Matched with Undo match first, and a tied deposit shows that it is refreshing. Undo or Ignore on a quick expense that the match only marked paid puts it back to Approved and clears the paid date.

  • Reconciliation

    Manual match drawer

    The manual match drawer works in All Properties view, shows the line's description instead of a raw key, closes with Escape, and does not show errors on split parts before you type. On a partly paid bill only an exact match is accepted, and the refusal for an unposted entry is plain English. The Discard dialog says what will happen. For a reimbursement that has not been paid out, the drawer says "This reimbursement hasn't been paid out yet. Pay it from the Reimbursements tab, then match the payout's withdrawal."

  • Reconciliation

    Match to journal entry checks amount and direction

    Match to journal entry now checks the amount and the direction of the money, so it no longer offers entries that moved money the opposite way, and it no longer overwrites another match. A bank line with no linked bank account is judged by the cash movement on the line's own side, card and loan feeds keep the debit-total rule, and transfers between funds are left out of the matched figure. The entry you are already matched to is always listed, marked as matched. Split entries now show the amount that actually touched the bank (for example $60.00 instead of the $123.45 entry total).

  • Reconciliation

    Plain sentences when a match cannot be made

    When someone else takes a bill, a payment or a bank line at the same moment, you now read a plain sentence in the toast or worksheet banner instead of a code. For example "This bill was just matched to a different bank line, so nothing was changed. Refresh the list and choose again." A reconciled bill says "This bill is already reconciled, so it can't be matched again.", an unpaid bill says "Only a fully paid bill can be reconciled. Check this bill's payments first.", and a locked worksheet says "This reconciliation is locked, so its matches can't change. Reopen the reconciliation to make changes."

  • Reconciliation

    Rules are safer and show their progress

    The Rules drawer only lists accounts a rule can use and its drop-downs are labelled. A rule run no longer overwrites a line someone already matched, and saving, switching or deleting a rule shows "Saving the change" until it is confirmed. Rule suggestions and nine other actions no longer report success when the background job failed, and no longer show raw job text.

  • Reconciliation

    Reimbursement payouts tell you when the bank line was not linked

    Mark paid and Send the payout post the payment and tell the payee as before, and when the reserved bank line could not be matched you see a 7 second warning explaining that the line was not linked, instead of "Reimbursement marked as settled" or "Payout on its way". A bank line released because its expense was created before automatic matching existed shows "Create did not finish" and tells you to match it by hand. Mark paid no longer reports success on a temporary failure.

  • Reconciliation

    Match suggestions that fail to load say so

    When match suggestions fail to load on the reconciliation page or in the Account close workspace you read "Match suggestions could not be loaded. Refresh and try again." instead of "Internal server error".

  • HERO AI

    HERO AI bank-line actions explain refusals

    When HERO AI creates an expense or invoice from a bank line, or links one, and the link is refused, it now repeats the same plain reason you see in the drawer.

  • Accounting

    Easier to read across the whole app

    Toasts follow dark mode and have a 3px colored edge. Muted and secondary text is darker, and disabled buttons and fields look disabled everywhere. The selected option in multi-select drop-downs is readable on every screen that uses one, the disabled Close Period button keeps a visible outline, and hover colors keep enough contrast in dark mode.

  • Accounts payable

    Record Payment is larger and calmer

    The Record Payment window on the Accounting dashboard is wider and taller (up to 640px wide), with a fixed header and footer and a single scrolling body, so required boxes are no longer hidden behind others.

  • Accounts payable

    Voiding a bill paid as resident credit explains why not

    When a reimbursement bill was paid as credit on the resident's account, Void now says the expense cannot be voided because the credit was already paid (and whether any of it has been applied to invoices) and that the expense stays as recorded, instead of telling you to "reverse the credit first". The wording uses your property's own word (parent, employee) and HERO AI repeats the same sentence.

  • Accounts payable

    Board rejection of a credit-paid bill is refused and the voter is told

    If a bill's reimbursement has already been paid as resident credit, a board rejection is refused so the books and the resident's credit cannot disagree, and the board member who cast the deciding vote gets a notice saying why.

  • HERO AI

    HERO AI reads documents filed in folders

    HERO AI now answers from AI-readable documents filed in a property's Documents folders even when the file was uploaded without being tagged to the property, such as a scanned bylaws PDF. It only uses files the person asking can already open in Documents.

Fixed

  • Reconciliation

    Overnight matching works again

    Duplicate withdrawals no longer match an already settled bill, instalments link to the right payment, and paid bills match automatically overnight. Matching a withdrawal to a bill links the payment record, and lost or retried matches no longer leave a bill marked paid with its bank line unmatched.

  • Reconciliation

    Creating an expense or invoice from a bank line

    Creating an expense or invoice from a bank line now links its own payment. When a link is refused you read the reason in the drawer (line already matched, worksheet locked, and so on), from AI create and from HERO AI, instead of "refresh and try again" or raw database text. A refused resident payment shows its message, not a raw code. A failed create no longer locks the line for 15 minutes. If a resident payment was recorded but its bank line could not be linked, you read "The payment was recorded, but the bank line was not linked. Review the bank line and match it."

  • Reconciliation

    Add a missing transaction never posts twice

    Adding a missing transaction checks the line's status first and never posts twice. If the audit record could not be saved it says "The entry was posted, but its audit record could not be saved. Don't post it again; contact support." A retry after a lost reply returns the payment already recorded instead of refusing.

  • Reconciliation

    Deposits and payouts are never counted twice

    Record incoming money, Create expense, Apply rule and the reimbursement Mark paid now refuse to book a deposit or payout that a debit file already covers. If the deposit really is separate, tick "This deposit is not from debit files", confirm, and the override is recorded in the activity log. Undoing a resident payment and recording the same deposit again is refused instead of booking it twice, and refunds and approval withdrawals retry on their own instead of showing a "someone else changed this" message.

  • Reconciliation

    Layout fixes on the reconciliation screens

    Text no longer overflows or clips, phone layouts stack properly, badges and counts no longer wrap or overlap, "Close Jan 2026 first" no longer breaks one word per line, refund candidates no longer repeat references, and clearing filters confirms with a message. One case that crashed the reconciliation page on load is fixed.

  • Accounts payable

    Record Payment keeps the invoices you picked

    Changing the payment amount no longer drops invoices you already picked. Invoices picked at $0.00 are filled oldest first up to the amount as you type, and amounts you typed yourself are kept, so Record payment no longer ends up disabled with money left unallocated.

  • Accounts payable

    Available credit always resolves in Record Payment

    After you choose a billing account, Available credit now loads or shows the Retry message after 15 seconds, instead of a grey bar that never finishes. The same protection applies to the credit card on the Billing account tab.

  • Accounts payable

    Withdrawn and returned bills can be deleted

    A bill you submitted and then withdrew, or that the board returned for correction, can be deleted again. Before, the delete was refused with a wrong reason. Deleting now removes the bill together with its voided entry and still refuses anything that has real money or a payment against it.

  • Reimbursements

    A reimbursement cannot be authorized or paid before its bill is approved

    Authorize and Mark paid on a reimbursement linked to a bill now wait for that bill's final approval. You read "This reimbursement can't be authorized yet. Its bill is still waiting for final approval. Approve the bill, then try again." (or "can't be paid yet"), so a pending approval or board vote is never bypassed.

  • Daily briefing

    The Chief of Staff briefing counts open work again

    The Monday and Friday Chief of Staff briefing was reporting zero open tickets, tasks and comments because of a bad status filter. It now counts them, and a failed lookup stops the briefing instead of quietly saying nothing is open.

  • Reports

    Account ledger counts refunds kept as credit and charges on draft invoices

    In the account ledger report, a refund kept as credit and moved to another account on the invoice now counts the moved amount, and a charge posted against a draft invoice counts once.

  • URBI Kore

    Kore recovers instead of going blank during slowdowns

    Moving between pages no longer re-checks your sign-in every time, so a slow moment on our side no longer shows a blank or loading page, and a temporary error no longer signs you out and sends you to the login page. A full page reload now waits at most 8 seconds for the sign-in check. Accounts that were deleted or rejected still sign out on load.

  • URBI Kore

    A failed page download reloads once instead of showing the crash screen

    If part of the app fails to download (a timeout on a slow connection), Kore now reloads the page once on its own, including on invitation and Portal links. A second failure inside a minute shows the usual error screen.

  • URBI Kore

    The login page no longer crashes on narrow windows

    The animated birds on the sign-in page are skipped when they would not fit, instead of crashing the page before you can sign in.

  • URBI Kore

    Terms and privacy links open the current pages

    Terms of service and privacy links used by the Resident App and by property emails now open the matching pages on myurbi.co instead of a not-found page.

  • Inbox

    The phone inbox loads past the first 50 conversations

    On the phone inbox, scrolling to the bottom now loads older conversations. Before, only the first 50 could be reached, and the rest only through search.

Everything Running As It Should?

System status shows how every part of URBI is performing right now, updated as things change.

System Status

See URBI in Action